• SATECMA
  • Tel.: +34 91 666 47 11
  • Avda. la Fundición, 69 - Pol. Ind. Santa Ana; Autovía N-III, Km 15
  • Rivas Vaciamadrid MADRID, 28522
    • Sigue a Satecma en Facebook
    • Sigue a Satecma e Twitter
    • Sigue a Satecma en Linkedin

Multimedia

Follow us in youtube

Impermeabilizante 30A

Fourth generation waterproofing coating which has been designed based on solvent free polyurethane resins. Combined with special reinforcement veil 300 P it’s possible to achieve continuous watertightness on every type of terrace both horizontal or with slopes up to 7%.
IMPERMEABILIZANTE 30 A is water and alkali resistant. It’s easy to apply and dries quickly thus reducing manpower considerably while applying, since it’s possible to get the requested thickness in two coats with the same product: the first coat as primer and the second, as finishing.
IMPERMEABILIZANTE 30 A combined with special reinforcement veil 300 P allows people’s transit.

Tecma Paint MRRE

TECMA PAINT MRRE is a two component product which is based on epoxy resins and selected aggregates.
Is a liquid, self-levelling mortar, which is especially recommended for repairing and filling horizontal hollows.

Tecma Paint Autonivelante

Three component epoxy coating designed for protecting concrete floors submitted to constant mechanical and chemical aggressions. Due to its self-levelling characteristics, the finish allows smooth and mechanically and chemically resistant floors.
Its special formulation allows 2-3 mm thickness coatings with an only application.

Tecma Aglomer

It is a product based on water emulsions free of volatile organic compounds (VOCs) designed for use as a decorative aggregate binder by mixing it in mixer or by spraying onto the aggregates. Aggregates are thus set and adhered to each other to prevent disintegration due to the weather conditions such as rain and wind. 
It has matting agents (which removes the ugly glare). It practically does not alter the appearance of the stone. Specially engineered and designed to blend with different types of aggregates used in landscaping and construction of pavements of garden. It provides a decorative and functional finish. 

Cartoon Satecma

This is one of our major reference works. When Captain Nemo asked us impermeabilizáramos its underwater city found a unique and challenging work for our products. Today, after decades in the sea, remain damp because Satecma products.

DESCA-2F: PERFUMED SCALE-REMOVER AND FACHADE CLEANER

DESCA-2F is an acid chemical scale-remover, which has been especially developed for removing efflorescences on brick surfaces, due to the salts extracted from the materials as an effect of dampness, and the subsequent formation, after water vaporisation, of the typical whitish stains of areas with efflorescences.

Formulated based on a special combination or organic and inorganic acids, it has the uncommon characteristic of absence of acre odours, which has allowed us to present a perfumed product with a nice scent high efficiency and easy use.

Its careful composition has a high penetration, and a great detergent power, which allows easy removing of remainders of cement, mortar, salts and greases. Used in the suitable dilutions, it does not attack paints in good state.

Ignifugados

IMPERMEABILIZANTE 10 AG® LONG LASTING WATER REPELLENT FOR VERTICAL SURFACES

IMPERMEABILIZANTE 10AG is the result of a long research in order to develop a water repellent-waterproofing for treating façades made of materials such as brick, siliceous calcareous brick, natural and artificial stone, mineral rendering and in general made of the most frequent materials used in this type of construction.
IMPERMEABILIZANTE 10AG is formulated based on solvents and modified siloxanes with low molecular weight (low molecule size), which makes easier the penetration in the treated supports and more penetration depth, thus providing more hydrorepellent efficiency and more time of efficiency for the treatment.
Treating the substrates with IMPERMEABILIZANTE 10AG as impregnating solution, we make possible the formation of an inner barrier of water repellent properties, non-adherent and with the peculiarity of having a high vapour diffusion rate. The final consequences provided by this type of barriers to the construction materials in vertical walls are:

PLASTICONS® PLASTICISER FOR MORTARS AND CONCRETES

PLASTICONS is a mass admixture for manufacturing mortars and concrete, with a plasticising -fluidising character, supplied at a very high concentration. PLASTICONS, used as a mixture in the recommended dose, improves, for mortars and concrete, among others, the following characteristics:

  • Increases mass plasticity, getting more workable mortars, and as a consequence, easier to apply with smoother finishes, without cracks.
  • Reduces the trend of aggregates to disgregate during concrete transport.
  • Allows reducing greatly the cement/water rate when preparing masses thus giving better resistance for the same workability.
  • Increases adherence of mortar and concrete to meshes, reinforcement and other surfaces, thus allowing for rendering and raisings, the application of thicker coats.
  • Provides greasier pastes, so the mixing machines are cleaner, since there´s less adherence of the paste.
  • Makes unmoulding operations easier.
  • High concentration, thus being unexpensive. With 1 litre of PLASTICONS we can treat up to 8000 kg of cement.

PROQUICK ® WATER LEAKAGE COVER

Instant setting mortar for sealing water leakage even with pressure.

TECMA PAINT AD : EPOXY ADHESIVE

Tyxothropic epoxy resin for joining different construction materials.
TECMA PAINT® AD is recommended for joining old and new concrete, old and new mortar, fixing of metal elements in concrete, and in general, as adhesive for fiber-cement, stone, marble and most of construction materials.
The product is supplied in two components, ready to be mixed the moment is going to be used.

TECMA PAINT P ® Peelable varnish

Bluish coloured clear varnish designed for temporal protection and packaging of
mechanized metal pieces, aluminium framework and anodised aluminium and all 
those metal elements with smooth surfaces which need temporal protection.
The varnish, once dry, forms a film which protects against splashes from mud,
cement, water, sand, etc. 

TECMADRY ® HYDRAULIC WATERPROOFING MORTAR

STOP LIQUID

STOP LIQUID is a system of instant and permanent repair of leaking composed of a band of glass fibre impregnated with polyurethane resin which gets activated when submerged in water and a small sealant putty of epoxy resin.

CORPORATE VIDEO

The company SATECMA, from the beginning of it activities in 1976 (35 years on the market) as Spanish independent company, has come developing the project of foundation to give form to an organization of national area, with entrepreneurship and intention of attacking the international markets, which has allowed us to sell in more than 30 countries of the whole world. 

BRUTUS

VIDEO DEMO BRUTUS  

DECAPA SCM

VIDEO DEMO DECAPA SCM

DESCA 2F

VIDEO DEMO DESCA 2F

HUM-PROT MATE

VIDEO DEMO HUM-PROT MATE

IMPERMEABILIZANTE 10 AG

VIDEO DEMO IMPERMEABILIZANTE 10 AG

PREMHOR COSMETICO

VIDEO DEMO PREMHOR COSMETICO

PREMHOR R

VIDEO DEMO PREMHOR R

PREMHOR

VIDEO DEMO PREMHOR

PROQUICK

VIDEO DEMO PROQUICK

TECMA-ADH

VIDEO DEMO TECMA-ADH

TECMA PAINT ANTIGRAFFITI

VIDEO DEMO TECMA PAINT ANTIGRAFFITI 

TECMA PAINT BREAK TERMIC

VIDEO DEMO TECMA PAINT BREAK TERMIC

TECMADRY

VIDEO DEMO TECMADRY

TECMA PAINT-TERMIC FAHRENHEIT 10.8

VIDEO DEMO TECMA PAINT-TERMIC FAHRENHEIT 10.8

TECMADRY CIMENTACIONES

VIDEO DEMO TECMADRY CIMENTACIONES

TECMADRY RPA

VIDEO DEMO TECMADRY RPA

TECMADRY ELAST

VIDEO DEMO TECMADRY ELAST

TECMADRY F

VIDEO DEMO TECMADY F 

TECMADRY MILENIUM

VIDEO DEMO TECMADRY MILENIUM

TECMA PAINT TERMIC Fahrenheit

After long years of research, the R+D+I department in INDUSTRIAS QUÏMICAS SATECMA, S.A. launches an acrylic coating with ceramic particles which can be used as a last generation new and efficient both thermal isolating and waterproofing agent. It’s a waterproofing agent for any type of roofs and supports which require an special protection.

TECMA AGLOSTONE

Epoxy resin binder or large wetting and impregnation, designed for the development of clusters based on aggregates of different particle sizes used in landscaping and draining pavements for intense pedestrian use and moderate use of cars, golf vehicles, etc.

Satecma products on Malta TV

Search products

Enter the word you want to search either the name of the product, the application, division, or what it is appropriate.